 |
| Nguồn gốc: | Hoa Kỳ |
| Hàng hiệu: | GE |
| Chứng nhận: | CO |
| Số mô hình: | IS200TBAIH1C |
| Số lượng đặt hàng tối thiểu: | 1 cái |
|---|---|
| Giá bán: | $1200 |
| chi tiết đóng gói: | 6.4" x 6.4" x 4.8" (16cm x 16cm x 12cm) |
| Thời gian giao hàng: | 5-8 ngày làm việc |
| Điều khoản thanh toán: | T/T |
| Khả năng cung cấp: | 10pcs |
| Hàng hiệu: | GE | Người mẫu: | IS200TBAIH1C |
|---|---|---|---|
| Tình trạng: | Mới | Tổng Trọng Lượng/Trọng Lượng Vận Chuyển: | 2,2 lbs / 35,2 oz / 1kg |
| Kích thước đóng gói: | 6.4" x 6.4" x 4.8" (16cm x 16cm x 12cm) | Nước xuất xứ/Nước gốc: | Hoa Kỳ (USA) |
| Thời gian dẫn: | Còn hàng | Cổng vận chuyển: | Xiamen |
| Sự chi trả: | T/T | Giá bán: | CUỘC ĐIỀU TRA |
| Màu sắc: | Phụ thuộc vào vật liệu | Bảo hành: | 12 tháng |
| Thời gian dẫn: | 5-8 ngày làm việc | đối tác chuyển phát nhanh: | DHL, UPS, TNT, FedEx và EMS |
IS200TBAIH1C GE Analog Input Terminal Board A 24 V DC Power 12 Number Of Channels
Product Details:
| Brand Name | GE |
| Model | IS200TBAIH1C |
| Catalog | Mark VI |
| Origin | United States (USA) |
| Dimension | 16*16*12cm |
| Weight | 1kg |
| HS Code | 8537101190 |
| Payment | T/T |
| Sales Price | $1200 |
| Warranty | 12 months |
| Lead time | 3-5 work days |
Additional Information:
| N/M | N/M |
| GEI-100165 | GEDS Standard Message Format (GSM) |
| GFK-1396 | CIMPLICITY HMI CimEdit Operation Manual |
| GEH-6408 | Control System Toolbox for Configuring the Trend Recorder |
Description:
The GE IS200TBAIH1C is an Analog Input Terminal Board manufactured and designed by General Electric as part of the Mark VI Series used in gas turbine control systems. Two outputs and 10 analog inputs are supported by the Analog Input terminal board. Two-wire, three-wire, four-wire, or transmitters that are powered externally can all be plugged into one of the ten analog inputs. A current of 0-20 mA or 0-200 mA can be configured for the analog outputs. Surge and high frequency noise are protected from by noise suppression circuitry in the inputs and outputs.
All of the transducers have access to a 24 V dc power source on the terminal board. By employing jumpers, one can select between current and voltage inputs. One of the two analog output circuits can be configured through a jumper for 4-20 mA or 0-200 mA, while the other can be adjusted for either. TMR applications can both use the same terminal board.
The I/O controller queries each cable connector's unique ID device on the terminal board. The ID device is a read-only chip that has the JR, JS, and JT connector locations, along with the serial number, board type, and revision number of the terminal board. A hardware incompatibility fault is produced when this chip is read by the I/O controller and a mismatch is discovered.
Người liên hệ: Candy Wang
Tel: +8618059279924
